The CB-12P Classroom Ceiling Enclosure is designed for classrooms with projectors. The 'P' version of the CB-12 features the addition of an industry standard 1½” NPT fitting to hang up to a 50 lbs. projector (including mount), while also supporting a maximum load per shelf of 20 lbs each. This 1’ x 2’ enclosure drops into any standard drop ceiling installation and provides electrical connections, AV equipment installation, and AV and Data signal routing above the ceiling. The Ceiling Enclosure has a projector receptacle facing the room, 3 additional un-switched receptacles inside the enclosure and shelves (Maximum load per shelf of 20 lbs each) to mount two ½ rack pieces of equipment. The cover is a white trim ring, similar to the ceiling grid, that holds a matching ceiling tile for a finished look. An optional fan kit is available.
The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.
You can now mount in DryWall
The CB-SR12 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.
Patent 9,966,752
APPLICATIONS: Anywhere a Projector or Display is ceiling mounted
Made for 'T' Grid Drop Ceilings
Conference Centers
Schools
General Meeting Facilities
Training Facilities
Airports
Museums
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR ceiling box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
The CB-12 Classroom Ceiling Enclosure is designed for classrooms with projectors. This 1’x2’ enclosure drops into any standard drop ceiling installation and provides electrical connections, AV equipment installation, and AV and Data signal routing above the ceiling. The Ceiling Enclosure has 3 additional un-switched receptacles inside the enclosure and brackets to mount two ½ rack pieces of equipment. The cover is a white trim ring, similar to the ceiling grid, that holds a matching ceiling tile for a finished look. An optional fan kit is available.
The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.
You can now mount in DryWall
The CB-SR12 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.
Patent 9,966,752
APPLICATIONS: Anywhere a Projector or Display is ceiling mounted
Made for 'T' Grid Drop Ceilings
Conference Centers
Schools
General Meeting Facilities
Training Facilities
Airports
Museums
When floor space is limited and keeping equipment secure is essential the C.O.R.E series will get the job done.
C.O.R.E Ceiling Boxes Product Video Review
IMPORTANT DETAILS Choose your box size from the drop down above
17075, 17084, 17076, 18367
,
1x2 Ceiling Boxes: CB-12
CB-12_266
The CB-12 Classroom Ceiling Enclosure is designed for classrooms with projectors. This 1’ x 2’ enclosure drops into any standard drop ceiling installation and provides electrical connections, AV equipment installation, and AV and Data signal routing above the ceiling. The Ceiling Enclosure has 3 additional un-switched receptacles inside the enclosure and shelves (Maximum load per shelf of 20 lbs each) to mount two ½ rack pieces of equipment. The cover is a white trim ring, similar to the ceiling grid, that holds a matching ceiling tile for a finished look. An optional fan kit is available.
The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.
You can now mount in DryWall
The CB-SR12 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.
Patent 9,966,752
APPLICATIONS:
Anywhere a Projector or Display is ceiling mounted
Made for 'T' Grid Drop Ceilings
Conference Centers
Schools
General Meeting Facilities
Training Facilities
Airports
Museums
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR ceiling box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS 1' x 2' CB with 2-1/2 rack shelves, 1 AC on ceiling surface, four (two duplex) AC
inside
17075, 17084, 17076, 18367
1x2 Ceiling Boxes: CB-12P
CB-12_267
DISCONTINUED
The CB-12P Classroom Ceiling Enclosure is designed for classrooms with projectors. The 'P' version of the CB-12 features the addition of an industry standard 1½” NPT fitting to hang up to a 50 lbs. projector (including mount), while also supporting a maximum load per shelf of 20 lbs each. This 1’ x 2’ enclosure drops into any standard drop ceiling installation and provides electrical connections, AV equipment installation, and AV and Data signal routing above the ceiling. The Ceiling Enclosure has a projector receptacle facing the room, 3 additional un-switched receptacles inside the enclosure and shelves (Maximum load per shelf of 20 lbs each) to mount two ½ rack pieces of equipment. The cover is a white trim ring, similar to the ceiling grid, that holds a matching ceiling tile for a finished look. An optional fan kit is available.
The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.
You can now mount in DryWall
The CB-SR12 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.
Patent 9,966,752
APPLICATIONS: Anywhere a Projector or Display is ceiling mounted
Made for 'T' Grid Drop Ceilings
Conference Centers
Schools
General Meeting Facilities
Training Facilities
Airports
Museums
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR ceiling box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS 1' x 2' CB with 2-1/2 rack shelves, 1 AC on ceiling surface, four (two duplex) AC inside and Proj Pole Adapter
The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.
The CB-SR12 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.
