FL-600P Floor Boxes and Covers FL-600P_120_121

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
        

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
       

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
       

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    HInged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
       

This high quality FL-600P Cover has a 1/4" Square Aluminum Flange with our unique hinged door. The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged door with U-Access Handle

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
       

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
       

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
      

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
     

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
     

This high quality FL-600P Solid Aluminum Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
     

This high quality FL-600P Solid Black Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

This high quality FL-600P Solid Clay Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

This high quality FL-600P Solid Grey Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

This high quality FL-600P Cover in Black Sandtex has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

This high quality FL-600P Cover in Painted Silver has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 

This high quality FL-600P Cover in Oak Sandtex has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Oak Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
    

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Aluminum Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Clay Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Grey Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-3 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Painted Silver Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Oak Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with  our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with  our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Aluminum Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Clay Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Grey Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-4 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Painted Silver Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with  our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    HInged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with  our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Aluminum Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Clay Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Grey Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-5 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Painted Silver Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Oak Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Sqaure Aluminum Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
  

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Aluminum Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Clay Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Grey Solid Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

The FL-600P-6 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Painted Silver Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Oak Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
   

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Black Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Clay Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Grey Painted Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Solid Aluminum Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Solid Black Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Solid Grey Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Black Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Stainless Steel Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-8 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Painted Silver Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved. 
 

Our FL-600P Floor Boxes combine rugged construction and an elegant design for use in carpet, tile, or wood covered floors over poured concrete applications. This makes it the perfect floor box for ballrooms, meeting rooms, public spaces, and high traffic areas. There is ample compartment room to accommodate power, audio, video, telecommunications, and data in one elegant and practical box.

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.50” raised edge style covers are UL scrub water approved. 

The innovation continues to the “transformable” box bottom. The FL-600P’s internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to in-stall floor box available. Removable center dividers make passing cables through the various compartments a snap. Integral “Easy Pour” leveling feet are standard on all of the box bottoms. Several box depths are available and are UL listed.

The unit includes all of the necessary internal plates and brackets to make “pre” and “post” pour compartment changes quick and easy. Using this system, both high and low voltage gang configurations, along with compartment isolation, can be implemented “on the fly”. This makes just about any cabling/connector scenario possible.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

BAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act  (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

The FL-600-SF8-C accessory bracket shown below enables usage of a round cover with our FL-600 floor box. 

The FL-600P floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Oak Sandtex Cover has our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

 The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Brass Carpet Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Aluminum Carpet Flange.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Hinged Cover

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The cable access door can be easily removed by lifting the integrated U-Access handle to quickly access the interior compartment, connectors, and cables.

•    11-gauge finished steel cover with choice of carpet edging
•    Mitered brass or aluminum carpet edging  .5” or .25” high
•    Stainless steel compression latches
•    Lift-off full access door

Flanging:  Height: .25” or .5”

There are a variety of covers to choose from. Options include integrated carpet edging, flat covers for non-carpeted, bare floor applications, and different finishes. The lift-off section of the cover allows full access to internal connector plates and stored cables. The hinged cable exit door flips back to allow the cover to remain in place after connections are made and cables are routed through it. The 0.25” and 0.5” raised edge style and solid covers are UL scrub water approved.

The FL-600P-10 floor box is designed for conference rooms, auditoriums, courtrooms, churches and all general meeting space with carpeted floors over concrete. This floor box handles power, audio, video, telecommunications and data in one elegant and practical box.

The FL-600P floor box is not only UL and CUL Listed but has also passed the latest UL test for scrub water. Because of FSR's unique engineering and manufacturing ability, FSR floor boxes pass for carpeted floors as well as tile and wood!

The innovation continues to the transformable back box. The FL-600P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation. These floor boxes are designed for the UL safety standard for scrub water. The standard only applied to boxed installed in concrete, not raised access boxes.

This high quality FL-600P Cover has a 1/2" Aluminum Carpet Flange with our unique tool-less lift off door.