The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Oak Sandtex Cover has our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ Hinged Door in Oak Sandtex
Floor Box - FL-710 Series Boxes and Covers: Select One...
FL-710_160
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Oak Sandtex Cover has our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ Hinged Door in Oak Sandtex
Floor Box - FL-710 Series Boxes and Covers
FL-710_161
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and is available in brass or aluminum. When the box is not in use, only the elegant, hand mitered carpet edge is visible.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
Choose your Cover from the drop down
Floor Box - FL-710 Series Boxes and Covers: FL-710-BLP-C
FL-710_156
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ 1/4" Brass Carpet Flange
Floor Box - FL-710 Series Boxes and Covers: FL-710-BSQ-C
FL-710_158
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ 1/4" Square Brass Flange
Floor Box - FL-710 Series Boxes and Covers: FL-710-SLP-C
FL-710_155
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ 1/4" Aluminum Carpet Flange
Floor Box - FL-710 Series Boxes and Covers: FL-710-SSQ-C
FL-710_157
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Cover has a 1/4" Square Aluminum Carpet Flange with our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
15861, 15863, 15796, 15862, 16065, 16061
FL-710 Box w/ 1/4" Square Aluminum Carpet Flange
Floor Box - FL-710 Series Boxes and Covers: FL-710-BLK-C
FL-710_159
The FL-710 floor box is designed for conference rooms, auditoriums, classrooms, etc. where it may be necessary to pass cables thru the box without interfering with the various connectors. This simplifies installation of wiring when a group of boxes must be connected in series. The pass thru route is front to back. The FL-710 is used on carpeted floors over concrete. This floor box provides a practical and safe solution for easy access to cables and connector plates. The lift-off section of the cover allows full access to internal cables and connector plates while a smaller, hinged trapdoor flips back to create a cable exit. All cables can be stored within the box when they are not in use, allowing unencumbered travel in the area.
Inside the FL-710, one angled bracket is provided for cable connections with ample clearance for cable connectors.The angled brackets provide one single and one double gang opening, which are all isolated for maximum safety.
The FL-710 is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications.
Notes: This floor box is not applicable for direct contact with grade (soil or gravel). For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.
This high quality FL-710 Black Sandtex Cover has our unique tool-less lift off door.
The sturdy 11 gauge steel cover is installed flush with the floor. The low profile edging is 1/4" high and when the box is not in use, only the elegant, hand mitered carpet edge is visible.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.