The PWB-250-SLDWHT-C is a solid white abandoment cover and requires a back box. They are used in place of the finish covers to protect the units during construction or when they are used as closed utility boxes not requiring external cable access. We have kept the cost low while delivering the quality and ease of installation you have always experienced with FSR products. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
The PWB-250 series is the largest and highest capacity model of the PWB-200 series of wall boxes. This unit is approximately 14.25” x 7”x 4” and has three single gang knockouts and one IPS knockout to mount up to six single IPS plates. In addition, a removable pass-through enclosure provides an additional single gang knockout and can be used to isolate cables that the installer may need to passthrough the back box.
The PWB-250 cover is available in white or black and is suitable for painting or other finishing, matching any décor. The two part cover is vented to provide convection cooling for the internal components. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible.
The PWB-250 comes with all the necessary hardware to make installing a breeze. Each wall box comes with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.
FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS Choose your PWB-250 or PWB-253 option from the drop down. Accessory cover options are also listed.
The PWB-250-BLK is a 14.25" x 7"x 4" back box and accompanying black cover. The back box has an IPS knockout to mount six single IPS plates, plus an additional three single gang knockouts for AC Power.
The PWB-250 cover is available in white or black and is suitable for painting or other finishing, matching any décor. The two part cover is vented to provide convection cooling for the internal components. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible.
The PWB-250 comes with all the necessary hardware to make installing a breeze. Each wall box comes with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.
We designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Wall Box including black cover with space for 6 IPS and 3 single gang AC KO
The PWB-250-WHT is a 14.25" x 7"x 4" back box and accompanying white cover. The back box has an IPS knockout to mount six single IPS plates, plus an additional three single gang knockouts for AC Power.
The PWB-250 cover is available in white or black and is suitable for painting or other finishing, matching any décor. The two part cover is vented to provide convection cooling for the internal components. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible.
The PWB-250 comes with all the necessary hardware to make installing a breeze. Each wall box comes with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.
We designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Wall Box including white cover with space for 6 IPS and 3 single gang AC KO
The PWB-250-B is a 14.25” x 7”x 4” back box only that requires a cover. The back box is typically installed flush with the wall's surface, between either wood or steel studs. All models are ready to install and include a two part cover with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet. A duplex box is also included for convenience and can be mounted at either the top or bottom duplex knockout areas on the back box.
FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
The PWB-250-2KO-BX is a 14.25” x 7”x 4” back box with two 2" KO, two 1.25" KOs and two 1 Gang AC. A finished cover is required for this back box and is sold separately. This model is ready to install and does include a temporary cover. All models are ready to install and include mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.
FSR designed this unit for new and existing construction. The back box is typically installed flush with the wall's surface, between either wood or steel studs. The appropriate mounting bracket and screws are included. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction. A duplex box is also included for convenience and can be mounted at either the top or bottom duplex knockout areas on the back box.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Wall Box with (2) 2” KO, (2) AC 1 Gang, (2) 1.25" KOs
The PWB-250-BLK-C is a black cover and requires a back box. The PWB-250-BLK-C is available in white or black and is suitable for painting or other finishing, matching any décor. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Replacement Cover Only in Black
The PWB-250-WHT-C is a white cover and requires a back box. is a black cover and requires a back box. The PWB-250-WHT-C is available in white or black and is suitable for painting or other finishing, matching any décor. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Replacement Cover Only in White
The PWB-250-SLDBLK-C is a solid black abandoment cover and requires a back box. They are used in place of the finish covers to protect the units during construction or when they are used as closed utility boxes not requiring external cable access. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Solid Abandonment Cover Only in Black
The PWB-250-SLDWHT-C is a solid white abandoment cover and requires a back box. They are used in place of the finish covers to protect the units during construction or when they are used as closed utility boxes not requiring external cable access. We have kept the cost low while delivering the quality and ease of installation you have always experienced with FSR products. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Solid Abandonment Cover Only in White
The PWB-250-VNTBLK-C is a solid black cover with an additional vent and requires a back box. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Cover Only with Additional Vent in Black
The PWB-250-VNTWHT-C is a solid white cover with an additional vent and requires a back box. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside of the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS PWB-250 Cover Only with an Additional Vent in White
The PWB-253-BLK is a 3" deep back box and black cover with 1 Duplex and Decora cover plate. This wall box is specifically sized for installation in 2”x 3” stud walls. One steel duplex cover plate and one steel Decora cover plate is included for convenience and to ensure proper fit in the shallow back box.
The PWB-253-BLK cover comes in black and is suitable for painting or other finishing, matching any décor. The cover is a two part cover with mounting screws in black and has a cable exit slot for the display connections. The excess cable can easily be hidden inside of the box making the entire installation as clean as possible. When complete the cover screws onto the front of the box once all connections are in place.
FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS 3” wall box with 1 duplex & decora cover plate in black
The PWB-253-WHT is a 3" deep back box and white cover with 1 Duplex and Decora cover plate. This wall box is specifically sized for installation in 2”x 3” stud walls. One steel duplex cover plate and one steel Decora cover plate is included for convenience and to ensure proper fit in the shallow back box.
The PWB-253-BLK cover comes in black and is suitable for painting or other finishing, matching any décor. The cover is a two part cover with mounting screws in black and has a cable exit slot for the display connections. The excess cable can easily be hidden inside of the box making the entire installation as clean as possible. When complete the cover screws onto the front of the box once all connections are in place.
FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.
Applications:
• Anywhere a video display is wall mounted! • Digital Signage • Electronic Billboards • Conference Centers • Museums • Schools • General Meeting Facilities • Airports • Arenas
BABAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:
TAA Compliance
FSR wall box products meet TAA and BABAA requirements.
*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.
IMPORTANT DETAILS 3” Wall Box with 1 duplex & decora cover plate with white cover
