Mic Jacks w/ Control Buttons Mic_Jacks_with_Control_Buttons_989

The first elegant way to mount a goose neck microphone. These stylish, mini tableboxes are available in round covers and three finishes (brass, silver, or black) to complement a variety of decors.

The T3-MJ+ is a simple installation requiring a 2-inch round hole. Less than 1.5-inches of under table clearance is required. The built-in, acoustically isolated microphone connector accommodates microphones with 3-pin XLR plugs of a diameter of 1-inch or less and provides superior shock and vibration damping.

They are designed to accommodate a wide range of tables and lecterns with up to 21⁄8-inch thick surfaces. An under-table shroud is provided as part of the assembly.

The T3-MJ+1B or 2B lets you add one or two buttons to the basic T3-MJ+. These units are custom assembled with momentary or maintained type switches with a variety of switch caps and bi-color LED’s. The switch (SPDT) contacts and LED wires terminate on screw terminals for ease of wiring.

Apllications:

• Conference and Boardroom Tables
• Judicial Benches and Tables
• Courtrooms
• Pulpits
• State Houses
• Control Rooms
• Lecturns

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The T3-MJ+ is a simple installation requiring a 2-inch round hole. Less than 1.5-inches of under table clearance is required. The built-in, acoustically isolated microphone connector accommodates microphones with 3-pin XLR plugs of a diameter of 1-inch or less and provides superior shock and vibration damping.

The T3-MJ+1B lets you add one button to the basic T3-MJ+. These units are custom assembled with momentary or maintained type switches with a variety of switch caps and bi-color LED’s. The switch (SPDT) contacts and LED wires terminate on screw terminals for ease of wiring.

The T3-MJ+ is a simple installation requiring a 2-inch round hole. Less than 1.5-inches of under table clearance is required. The built-in, acoustically isolated microphone connector accommodates microphones with 3-pin XLR plugs of a diameter of 1-inch or less and provides superior shock and vibration damping.

The T3-MJ+2B lets you add two buttons to the basic T3-MJ+. These units are custom assembled with momentary or maintained type switches with a variety of switch caps and bi-color LED’s. The switch (SPDT) contacts and LED wires terminate on screw terminals for ease of wiring.