FL-540P Floor Boxes and Covers FL-540P_189_197

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-540P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Sqaure Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-2.25 floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 2.25" deep.This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The FL-540P-4-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 4" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-4-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 4" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-4-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 4" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-4 floor box is designed for raised access carpeted floors.This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-4-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 4" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-4-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 4" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-6-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 6" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-8-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 8" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-540P-10-B floor box is designed for raised access carpeted floors. It is a FL-540P Back Box and is 10" deep. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the configurable back box. The FL-540P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-540P Black Sandtex Cover has our unique tool-less lift off door. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

FSR's FL-540P Floor Boxes and Covers provide clean, flush access to power, data, AV, and telecom connections in raised access carpeted floors. Designed for spaces such as hotel lobbies, conference centers, boardrooms, cruise ships, and upscale commercial interiors, the FL-540P stores cables inside the box when not in use and uses a lift-off cover with a smaller hinged trap door for active cable access. Its configurable back box supports multiple high- and low-voltage gang layouts, giving installers a flexible raised floor box solution that keeps floors clear and professional.

The FL-540-SF8-C accessory bracket shown below enables usage of a round cover with our FL-540 floor box. 

Note: This floor box is only intended for tiled or carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade. For grade applications, use the FL-GRD2/4 pour pan as a foundation before box installation.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

**BABAA and TAA compliance by model, which may vary over time due to changes in legislation and/or manufacturing plans. Be sure to ask for certification at the time of order.