FL-640P - Boxes and Covers FL-640P_203_211

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

 The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box. 

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-6 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-8 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-10 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

Applications:

• Hotel Lobbies
• Conference Centers
• Board Rooms
• Cruise Ship
• Anywhere an upscale, richly finished look is required

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.

The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.

The innovation continues to the transformable back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.

Each floorbox comes with a temporary cover.

Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.

This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.

The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.

BABAA Compliance

FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Build America Buy America Act (BABAA) compliant. Look for this logo on our website:

TAA Compliance

FSR floor box products meet TAA and BABAA requirements.

*Compliance by model may vary over time due to changes in legislation and/or manufacturing plan. Be sure to ask for certification at the time of order.