- Description
- Specifications
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
Choose your Box Size and Cover from the drop down |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
Choose your Box Size and Cover from the drop down |
This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15529 | |
FL-640P Cover w/ 1/4" Brass Carpet Flange (Lift off door) |
This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
18273 | |
FL-640P Cover w/ 1/4" Square Brass Flange (Lift off Door) |
This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
18272 | |
FL-640P Cover w/ 1/4" Alm Carpet Flange (Lift off door) |
This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
18274 | |
FL-640P Cover w/ 1/4" Square Alm Flange (Lift off door) |
This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15533 | |
FL-640P Cover w/ Hinged Door in Black Sandtex |
This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
FL-640P Cover w/ Hinged Door in Lt. Oak Sandtex |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
15527 | |
4" Deep FL-640P Box with a temporary cover (thickness of .12") |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15527, 15529 | |
4" Deep FL-640P Box w/ 1/4" Brass Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15527, 18273 | |
4" Deep FL-640P Box w/ 1/4" Square Brass Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15527, 18272 | |
4" Deep FL-640P Box w/ 1/4" Aluminum Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15527, 18274 | |
4" Deep FL-640P Box w/ 1/4" Square Aluminum Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15527, 15533 | |
4" Deep FL-640P Box w/ Black Sandtex Cover |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
4" Deep FL-640P Box w/ Oak Sandtex Cover |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081 | |
5" Deep FL-640P Box with a temporary cover (thickness of .12") |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081, 15529 | |
5" Deep FL-640P Box w/ 1/4" Brass Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081, 18273 | |
5" Deep FL-640P Box w/ 1/4" Square Brass Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081, 18272 | |
5" Deep FL-640P Box w/ 1/4" Aluminum Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081, 18274 | |
5" Deep FL-640P Box w/ 1/4" Square Aluminum Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
 The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
The FL-640-SF8-C accessory bracket shown below enables usage of a round cover with our FL-640 floor box.Â
 |
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
BAA Compliance
FSR floor, ceiling, table, wall box, and Smart-Way raceway products are Buy America/ Build America Act (BABAA) compliant. Look for this logo on our website:
Â
TAA Compliance
FSR floor box products meet TAA and BABAA requirements.
18081, 15533 | |
5" Deep FL-640P Box w/ Black Sandtex Cover |
The FL-640P-6 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
15528 | |
6" Deep FL-640P Box with a temporary cover (thickness of .12") |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 15529 | |
6" Deep FL-640P Box w/ 1/4" Brass Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 18273 | |
6" Deep FL-640P Box w/ 1/4" Square Brass Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 18272 | |
6" Deep FL-640P Box w/ 1/4" Aluminum Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 18274 | |
6" Deep FL-640P Box w/ 1/4" Square Aluminum Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 15533 | |
6" Deep FL-640P Box w/ Black Sandtex Cover |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
6" Deep FL-640P Box w/ Oak Sandtex Cover |
The FL-640P-8 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
17171 | |
8" Deep FL-640P Box with a temporary cover (thickness of .12") |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
15528, 15529 | |
8" Deep FL-640P Box w/ 1/4" Brass Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17171, 18273 | |
8" Deep FL-640P Box w/ 1/4" Square Brass Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17171, 18272 | |
8" Deep FL-640P Box w/ 1/4" Aluminum Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17171, 18274 | |
8" Deep FL-640P Box w/ 1/4" Square Aluminum Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17171, 15533 | |
8" Deep FL-640P Box w/ Black Sandtex Cover |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
8" Deep FL-640P Box w/ Oak Sandtex Cover |
The FL-640P-10 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
Applications:
- Hotel Lobbies
- Conference Centers
- Board Rooms
- Cruise Ship
- Anywhere an upscale, richly finished look is required
17178 | |
10" Deep FL-640P Box with a temporary cover (thickness of .12") |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Brass Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17178, 15529 | |
10" Deep FL-640P Box w/ 1/4" Brass Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Brass Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17178, 18273 | |
10" Deep FL-640P Box w/ 1/4" Square Brass Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Aluminum Carpet Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17178, 18272 | |
10" Deep FL-640P Box w/ 1/4" Aluminum Carpet Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Cover has a 1/4" Square Aluminum Flange with our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17178, 18274 | |
10" Deep FL-640P Box w/ 1/4" Square Aluminum Flange |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Black Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
17178, 15533 | |
10" Deep FL-640P Box w/ Black Sandtex Cover |
The FL-640P-4 floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The sturdy drop-in floor lip supports the unit and installs flush with the floor.
The innovation continues to the transformable
back box. The FL-640P's internal brackets can be arranged to provide numerous options for both high and low voltage standard gang openings making it the most flexible and easiest to install floor box available.
Each floorbox comes with a temporary cover.
Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.
This high quality FL-640P Oak Sandtex Cover has our unique tool-less lift off door.
The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the box when not in use, allowing unencumbered travel over the floor.
10" Deep FL-640P Box w/ Oak Sandtex Cover |
Related Products
- 99495 DMTX SED - FL-6X0P4-CRST-DMTx Drawing.pdf
- 99495 MMS-FL-600 640P-4 Wallplate Bracket Kit For FL-600 and 640P-4 - AMX.pdf
- FL-640P-10.dwg
- FL-640P-10.dxf
- FL-640P-10.pdf
- FL-640P-4.dwg
- FL-640P-4.dxf
- FL-640P-4.pdf
- FL-640P-5.dwg
- FL-640P-5.dxf
- FL-640P-5.pdf
- FL-640P-6.dwg
- FL-640P-6.dxf
- FL-640P-6.pdf
- FL-640P-8.dwg
- FL-640P-8.dxf
- FL-640P-8.pdf
- FL-640P-BLK-C.dwg
- FL-640P-BLK-C.dxf
- FL-640P-BLK-C.pdf
- FL-640P-BLP-C.dwg
- FL-640P-BLP-C.dxf
- FL-640P-BLP-C.pdf
- FL-640P-BSQ-C.dwg
- FL-640P-BSQ-C.dxf
- FL-640P-BSQ-C.pdf
- FL-640P-ISO.dwg
- FL-640P-ISO.dxf
- FL-640P-ISO.pdf
- FL-640P-OAK-C.dwg
- FL-640P-OAK-C.dxf
- FL-640P-OAK-C.pdf
- FL-640P-SLP-C.dwg
- FL-640P-SLP-C.dxf
- FL-640P-SLP-C.pdf
- FL-640P-SSQ-C.dwg
- FL-640P-SSQ-C.dxf
- FL-640P-SSQ-C.pdf
- 15527 fl640p 4 b
- 15527 fl640p 4 b iso
- 15527 fl640p 4 b top
- 15528 fl 640p 6 b
- 15528 fl 640p 6 b iso
- 15528 fl 640p 6 b top
- 15529-fl-640p-blp-c_iso.jpg
- 15529-fl-640p-blp-c_overhead.jpg
- 15529-fl-640p-blp-c_top.jpg
- 15532-fl-640p-oak-c_iso.jpg
- 15532-fl-640p-oak-c_overhead.jpg
- 15532-fl-640p-oak-c_top.jpg
- 15533-fl-640p-blk-c_overhead.jpg
- 15533-fl-640p-blk-c_top.jpg
- 15533-fl-640p-blk_iso.jpg
- 15534-fl-640p-slp-c_iso_right.jpg
- 15534-fl-640p-slp-c_overhead.jpg
- 15534-fl-640p-slp-c_top.jpg
- 15852 fl 640p bsq
- 15852 fl 640p bsq iso
- 15852-fl-640p-bsq.jpg
- 15852-fl-640p-bsq_iso.jpg
- 15983-fl-640p-ssq-c_iso.jpg
- 15983-fl-640p-ssq-c_overhead.jpg
- 15983-fl-640p-ssq-c_top.jpg
- 17171 fl 640p 8 b
- 17171 fl 640p 8 b iso
- 17171 fl 640p 8 b top
- 17178 fl 640p 10 b
- 17178 fl 640p 10 b iso
- 17178 fl 640p 10 b top
- 99495 fl 6x0p 4 crst dmtx